MicroNet SP916N, Руководство пользователя

Страница: 33 / 69

30
802.1d Spanning Tree
If 802.1d Spanning Tree function is enabled, this router will
use the spanning tree protocol to prevent from network loop
happening in the LAN ports.
DHCP Server
Users can enable or disable the DHCP server. By
enabling the DHCP server, the router will automatically give
LAN clients an IP address. If the DHCP is not enabled then
users will have to manually set the LAN client’s IP addresses.
Make sure the LAN Client is in the same subnet as this
broadband router for the router to be the LAN client’s default
gateway.
Lease Time
The DHCP when enabled will temporarily give the LAN clients
an IP address. In the Lease Time setting, users can specify
the time period that the DHCP lends an IP address to the LAN
clients. The DHCP will change the LAN client’s IP address
when this time threshold period is reached.
IP Address Pool
Users can select a particular IP address range for the DHCP
server to issue IP addresses to LAN Clients.
Domain Name
Users can specify a Domain Name for the LAN network.
Click <Apply> at the bottom of the screen to save the above configurations.
4.2.3.1 Static DHCP Leases Table
This function allows user to assign a static IP address to a specific computer so that it
is not necessary to set the IP address for a computer, and still enjoy the benefit of
using DHCP server. Maximum 16 static IP addresses can be assigned here.
Parameter Description
Enable Static DHCP
Leases
Check this box to enable this function.
MAC Address
Input the MAC address of the computer or network device.
IP address
Input the IP address to assign to this computer or network
device.
Click <Add> to enter the entry into the table, otherwise click on <Clear> to remove all
characters.