- 24 -
24
IP Filtering
The Wireless Router could filter the outgoing packets for security or management
consideration. You can set up the filter against the IP addresses to block specific
internal users from accessing the Internet.
Configuration
1.
Click the check box of “
Enable IP Filtering
” to
enable the function.
2.
Enter the specific Local IP address (EX 10.10.3.9),
Protocol (UDP/TCP), and comment (EX. Peter)
STEPS
3.
To delete the IP address on the list, click the check
box in the select item, and click the “
Delete
Selected
”. If you want to delete all entries on the
list, click “Delete All” to remove all of them.
Click <
Apply Change
> at the bottom of the screen to save the above configurations.
You can now configure other advanced settings or start using the router.
