- 26 -
26
Port Forwarding
The Port Forwarding allows you to re-direct a particular range of service port
numbers (from the Internet/WAN Ports) to a particular LAN IP address. It helps
you to host some servers behind the router NAT firewall.
Configuration
1.
Click the check box of “
Enable port forwarding
” to
enable the function.
2.
Enter the specific IP address (EX 10.10.10.10),
Protocol (UDP/TCP), Port range (EX 25-110), and
comment (EX. E-Mail)
STEPS
3.
To delete the IP address on the table, click the
check box in the select item and click the “
Delete
Selected
”. If you want to delete all entries on the
table, click “
Delete All
” to remove all of them.
Click <
Apply Change
> at the bottom of the screen to save the above configurations.