Package
Content
Thank you for purchasing Micronet Ethernet Media Converter. Before you start installing the Media
Converter, verify the following items in the package
y
Media Converter
y
User’s Manual
y
Power Adapter
Product Overview
The SP362B/SP363B 1000BASE-TX to 1000BASE-SX/LX converter is primarily designed for larger
and higher bandwidth demanding workgroups that require expansion of the Ethernet network.
SP362B/SP363B features a RJ45 jack and an SC fiber optic connectors, connecting the
1000BASE-TX network to the 1000BASE-SX/LX (fiber optic) network. At full duplex mode, the
converter can extend distances up to 55o meters for Multi-mode fiber and up to 20 kilometers for
Single-mode fiber.
The SP373 Series 10/100BASE-TX to 100BASE-FX converter is primarily designed for larger and
higher bandwidth demanding workgroups that require expansion of the Ethernet network. SP373
Series Converter features a RJ45 jack and an ST/SC/MT-RJ/VF-45 fiber optic connectors, connecting
the 10/100Mbps network to the 100BASE-FX (fiber optic) network. At full duplex mode, the converter
can extend distances up to 2 kilometers for Multi-mode fiber and up to 75 kilometers for Single-mode
fiber.
Installation
As with any electric device, you should place the equipment where it will not be subjected to extreme
temperatures, humidity, or electromagnetic interference. Specifically, the site you select should meet
the following requirements:
1.
The ambient temperature should be between 0 to 40 degrees Celsius.
2.
The relative humidity should be less than 90 percent, non condensing.
3. Surrounding
electrical
devices should not exceed the electromagnetic field (RFC) standards
for IEC 801 3, Level 2 (3V/M) field strength.
2
4.
Make sure that the equipment receives adequate ventilation. Do not block the ventilation holes
on each side of the switch or the fan exhaust port on the side or rear of the equipment.
