Platform Accessories
Accessory Cables
GDUTUG500/01
CE-500 MDT Hardware Guide
59 / 97
7
7
P
P
l
l
a
a
t
t
f
f
o
o
r
r
m
m
A
A
c
c
c
c
e
e
s
s
s
s
o
o
r
r
i
i
e
e
s
s
A
A
c
c
c
c
e
e
s
s
s
s
o
o
r
r
y
y
C
C
a
a
b
b
l
l
e
e
s
s
Optionally, the CE-500 platform provides accessory cables for connection of device signals in the Fixed-
mounted operation mode. All cables are connected to device terminal connectors, which are located on
the bottom panel. All of these cables use the same type of a connector.
However a mechanical “key“ is implemented on each connector cover to prevent the connection of an
incorrect cable to an incorrect device connector. A mechanical cable fixing option supported by the
screw inserts is located near each terminal connector. Main and Enhanced accessory cables support
connectivity of signals that are provided by the basic device configuration. Therefore, these connectors
always exist on the device panel. Additional accessory cables are used to support optional platform
features and require the relevant optional device module.
The pinout and types of the interface connectors provided by the accessory cables are similar to those
for the CE-500 Device Cradle (they both have the same purposes).
In addition to the interfaces that require the standard type of connector (such as USB and Ethernet), the
remaining device signals are implemented on the cables or the Cradle by
of connectors. For implementing the connectivity, use the opposite (receptacle) type of connector with
the relevant amount of pins for each peripheral interface. This is the
Molex Micro-Fit 3.0™ Crimp Terminal Female
for the wiring. Ensure that the correct
wire size (AWG) for each signal is according to the requirements of the cable-connector Signal Maps
specifications.
Type for all Device connectors of accessory cables – Molex HandyLink™ I/O Interconnect System
Molex part number – 0453391600
