Video Wall Installation Manual V155, V170, V180
Page 7
Rev. 04/2019
Step 2 –Determining Reference Height and Fastening
Instructions
Diagrams
•
Measure the total length of video wall
mounting frame in order to determine
center point for wall installation.
Take total length _____ / 2 to
determine center point.
Determining center point for video wall.
•
Mark wall with centre point.
•
Mark wall with outside measurements
of video wall as shown in figure 2A.
•
Level and fasten mount to wall.
(Fastening hardware not included)
For wood or metal studded walls only
Determine location of all wall studs that are
behind video wall and mark each stud
accordingly using stud finder.
For concrete or concrete block walls only
Depending on number of Wall Brackets
(Part E) supplied, determine placement by
evenly spacing them out
Fig. 2A
