Micron RS-2, Руководство по эксплуатации, Страница: 7 / 8

13
U K
12
U K MAIN LED COLOUR SELECTION
The main bite indication LED is a high-brightness
white LED. A selection of different colour lenses are
supplied, which may be clipped in position, to change
the LED colour.
The LED latches on for 20 seconds after the last bite
indication tone. If a dropback is detected, the LED will
flash. As any bite alarm can be assigned to any LED
on the receiver, there is no need to make any other
changes, when changing LED colour.
EXTERNAL SOCKET FOR ILLUMINATED
SWINGERS AND HANGERS
Remove the rubber bung in the rear case, to gain
access to the illuminated swinger/hanger socket. The
swinger/hanger will be illuminated whenever the main
LED is illuminated and will also flash to indicate a
dropback movement.
The swinger/hanger will also be dimly illuminated when
the nightlight is enabled, to give better visibility at
night.
NOTE: this night illumination feature is not
implemented on Issue 1.0 hardware, but will appear
on production units.
PIN CODE SECURITY FEATURE
(WHEN USED WITH I-COM INTERACTIVE
TRANSCEIVER)
This feature is not implemented in Revision 1.0 soft-
ware.
Show images of I-COM & RX3 here