background image

Digital Menu Board 4249 Wall Mount Installation Manual 

Page 14 

Rev. 04/19 

Warranty 

Micron Display Solutions (“MICRON”) warrants to the first purchaser for this product (“Product”), when 
shipped in its original container and sold or distributed in Canada by Micron or by an authorized Micron 
dealer, and Product was not sold “as is” or “sales final” that the Product will be free from defects in 
material and workmanship for a period of three (3) years and will within the warranty period, either repair 
the defective Product or provide the purchaser a replacement of the defective Product. 

This warranty does not apply to any appearance items of the product nor to the exterior of which has been 
damaged or defaced, which has been subjected to improper voltage or other misuse, abnormal service or 
handling, which has been altered or modified in design or construction, or if the serial number or model 
number affixed to Product has been removed, defaced, changed, altered or tampered with. 

 

Micron Display Solutions 

2679 Bristol Circle, Unit 6 

Oakville, Ontario 

L6H 6Z8 

(905)-828-1662 

www.microndisplaysolutions.com

 

Содержание M2T4249















Отзывы: