Video Wall Installation Manual – 4WX2H, 5WX2H
Page 7
Rev. 09/2019
Step 1 – Attaching mounting brackets and key measurements
Instructions
Diagrams
•
Remove monitors to be installed from
their cartons and attach the Panel VESA
Brackets (Part D) to back of monitors at
the VESA mounts as shown in figure 1A.
Mounting hardware is provided (Part
F).
Note: If monitor orientation is portrait
mode attach Mounting Brackets to
back of monitors with that orientation.
•
The mounting hardware consists of
various lengths of M6 and M8 screws to
accommodate different manufacturer
specifications.
•
If M6 screws are required, you will
need to use the white M8 sleeves by
inserting an M6 screw into the white
sleeve and then attaching Panel VESA
Bracket to back of monitor. See figure
1B.
Fig. 1A
Fig. 1B
•
Measure the difference between top of
monitor and bottom of top mounting
bracket as shown in figure 1C.
Distance: _________
This is referred to as measurement A.
Fig. 1C
•
Measure the total height of monitor as
shown on figure 1D
Distance: _________
This is referred to as measurement B.
Fig. 1D
