Micron Electronics NetFRAME LV2000, Руководство пользователя

Страница: 46 / 102

Micron Electronics, Inc. 3-9
Chapter 3: Configuring the System
If there is no ISA board installed, do the following steps:
1. In the Board Name box, type a description of the board.
2. In the Manufacturer box, type the name of the board
manufacturer.
3. From the Board Type box, choose the type of board.
4. From the Board Slot box, choose the type of slot.
5. In the DMA box, define up to four DMA channels.
6. In the IRQ box, define up to seven IRQ levels.
7. In the Ports box, define up to eight ranges of I/O ports.
8. In the Memory box, define up to eight memory address ranges.
9. Press <F10> to save the ISA board definition.
To load an existing ISA board:
Press <F9>.
To delete an ISA board: Press <F9>, and confirm that you intend to delete the
ISA definition.
Change Configuration Settings
Use step 3 to view or change the configuration settings for any board in the
system. You can verify that the system board and adapter board resources are
set properly. Configuring the system board involves a number of options.
To view or change the settings for a board:
1. Use the arrow keys to select the board.
2. Press <Enter>.
3. When you are satisfied with the current settings, press <Esc> to
return to the main menu.
Advanced Options
The Advanced Options menu is intended for advanced users. These options
are available:
Advanced Options Select to view this information:
Global resource map A list of allocated resources (DMA, logical slot, IRQ,
ports, and memory)
Board details Details about individual boards
System details Information on the add-in board slots: slot number,
type, whether bus master or not, NVRAM size
To view the Advanced Options menu: from the Change Configuration
Settings dialog box, press <F9>.