Micron Electronics NetFRAME LV2000, Руководство пользователя

Страница: 45 / 102

3-8 Micron Electronics, Inc.
Micron NetFRAME LV2000 Server System User’s Guide
Add and Remove Boards
Use step 2 to add, delete, or move boards. Most ISA boards cannot be detected
automatically by the SCU, so you MUST use this step to add them to the system.
However, PCI and ISA Plug and Play boards ARE automatically detected and
added by the SCU. If the SCU did not detect a board, you can add a board
using this step.
To add a board:
1. Press <Ins>.
2. From the Select the Board to Add dialog box, select the board’s
.CFG file and press <Enter>.
To delete an existing board:
1. Use the arrow keys to select the board you want to delete.
2. Press <Del>.
3. Confirm that you want to delete the board.
To move a board from one slot to another:
1. Use the arrow keys to select the board you want to move.
2. Press <F7>.
If you add, move, or remove boards
Manually verify the resource settings of these adapters, and any other
adapters that are not locked, before saving your configuration.
To define an ISA board:
1. Press <F6> to display the ISA Board Definition dialog box. Refer
to the section below for details.
Define an ISA Board
To define an ISA board that has no .CFG file, press <F6> while viewing the
Add and Remove Boards screen. The ISA Board Definition dialog box will
appear. It is necessary to define a board to prevent other boards in the system
from using the same IRQ levels, DMA channels, I/O addresses, or memory
addresses as that of the ISA board.
If there is an ISA board already installed, you can press <F9> to load its
definition and then modify that definition for a new ISA board you are
installing.