EN
33
Software commands
Choose measure blood pressure
Click
«1st VISIT»
, «
FOLLOW-UP
»
Enter Patient ID
Input Patient ID
Start to perform
Press the «Measure» button
Store blood pressure measurements
Click «Save». The data is stored in an Excel data table. The file
name is generated automatically from the following format
«
Patient ID+ WatchBP measurement mode +
yyyymmdd.xls
».
View the data
Go to the folder where the file is saved and open the
corresponding Excel file.
Print the data sheet
While the corresponding Excel file is open, click print in Excel.
Disconnect the device
Click «Disconnect» before existing the program
Close the program
Click
«Close»
*
The software automatically searches for the nearest WatchBP device when the program is launched. If the device is
not located, confirm that the Bluetooth switch on the WatchBP Office is set to the ON position.