18
AUSCULT 1st FOLLOW UP
AUSCULT 1st FOLLOW UP
AUSCULT 1st FOLLOW UP
Taking measurements using WatchBP Office (cont.)
«1st VISIT» Mode
1)
Turn on the power
– Turn on the device by
switching the I/O switch at the back of the device
to the ON position. and make sure Bluetooth
switch is in off position.
3)
Switch to «1st VISIT» Mode
– Slide the Mode
Switch to
«1st VISIT»
Mode.
*
Additional visual instruction can be found on the cuff
4)
Adjust inflation pressure if necessary
–
Inflation pressure can be set manually from 140
to 280 mmHg by pressing and holding the Start/
Stop Button for 7 seconds.
Press the M Button to adjust the pressure and
press Start/Stop to save the setting.
2)
Apply the cuff
– Properly fit one cuff to each of
the patient’s arms.
DC 6V 600mA
DC 6V 600mA