EN
17
5)
Start inflation
– Press the Start/Stop Button to
start inflation of the cuff.
6)
Take note
– Take note of the systolic and
diastolic values in the same manner used for
sphygmomanometer measurements.
7)
Set device to Stand by Mode
– The device can
be set to Stand by Mode by pressing the Start/
Stop Button. The device will automatically switch
to Idle Mode if left for five minutes.
Stand by mode
*
The default inflation pressure is 180 mmHg.
*
When the device is in standby mode, it will remind you
the current preset pressure setting by displaying the
current pressure setting on the screen.
Press and hold
for 7 seconds...