Microlife BP 3AX1, Инструкция по эксплуатации

Страница: 16 / 52

Press
OK
and the display shows graph of all data.The
lines indicate the systolic (top end) and Diastolic (bottom
end) values. Press
▲
or
▼
to move the cursor between
measurements. The currently selected measurement is
indicated by a blinking line. Press O/I to exit this mode.
6.2. Setting the User
This monitor allows you to track readings for two individuals
independently. Scroll to User and press
OK
to enter the submenu.
Press
▲
or
▼
to make your selection. Select to set the
device to not save readings.
Select
to select user 1. Any readings made when user 1 is
selected will be saved separately from other readings.
Select
to select user 2. Any readings made when user 2 is
selected will be saved separately from other readings.
After selecting user 1 or user 2 you are prompted to enter the
user name. You can use up to six characters. To keep the default
name «User_1», press O/I. To enter a different name, follow
these instructions:
Press
▲
or
▼
to scroll through the alphanumeric characters A ~ Z
and 0 ~ 9. There is also one underscore and one space character.
Press
OK
to accept the character and move to the next space.
After you have finished entering the name, press
OK
to exit the
user setup menu. The user name is displayed on the screen.
14
No.7 3/03 15:48
200
150
100
50
SYS
145
DIA
85
PUL
98
4/17 - 4/18 AVG MAM
USER
[
▼
] [
▲
]
USER_1
[
▼
] [
▲
]
EXIT=[O/I]
JAMES MAM
15:31
Apr 17 2003