background image

 

1

 

 

1

 2400-2483.5 MHz, which is license-free 

2.  General 

 

2.0

 

Product Overview 

The pMXDDL2450   is a high-performance embedded wireless data 

transceiver.  Operating in the 2400 – 2483.5 MHz ISM band, this 

frequency-hopping spread-spectrum module is capable of providing reliable 

wireless data transfer between almost any type of equipment which uses an 

asynchronous serial interface.  The small-size and superior RF performance 

of this module make it ideal for many applications.  

 

While a pair of pMXDDL2450   modules can link two terminal devices 

(“point-to-point” operation); multiple modules can be used together to 

create a network of various topologies, including “point-to-multipoint” and 

“repeater” operation. Multiple independent networks can operate 

concurrently, so it is possible for unrelated communications to take place in 

the same or a nearby area without sacrificing privacy or reliability. 

 

1.1  Features

 

Key features of the pMXDDL2450   include: 

  transmission within a public, license-exempt band of the radio 

spectrum

1

 – this means that it can be used without access fees 

(such as those incurred by cellular airtime). 

 

a serial I/O data port  with handshaking and hardware flow 

control, allowing the pMXDDL2450   to interface directly to 

any equipment with an asynchronous serial interface. 

 

ease of installation and use – the pMXDDL2450   module uses 

a subset of standard AT style commands, very similar to those 

used by traditional telephone line modems. 

  all units in a system are physically identical, and can be 

configured as a master, repeater or slave using the AT 

command set. No hardware modifications are required 

  128 sets of user-selectable pseudo-random hopping patterns, 

intelligently designed to offer the possibility of separately 

operating multiple networks while providing security, 

reliability and high tolerance to interference. 

  encryption key with 65536 user-selectable values to maximize 

security and privacy of communications. 

 

32-bit of CRC error detection and auto re-transmit to provide 

accuracy and reliability of data. 

within North America; may need to be factory-configured differently for some countries.

 

Содержание pMXDDL2450

















Отзывы: