© Microhard Systems Inc.
36
4.0 Configuration
This selection determines if the BulletPlus will obtain an IP address
from a DHCP server on the attached network, or if a static IP address
will be entered. If a Static IP Address is chosen, the fields that follow
must also be populated.
Connection Type
Values (selection)
DHCP
Static
If ‘Static’ Connection Type is selected, a valid IPv4 Address for the
network being used must be entered in the field. If ‘DHCP’ is chosen
this field will not appear and it will be populated automatically from the
DHCP server.
IP Address
Values (IP Address)
192.168.168.1
Within any IP network, each
device must have its own
unique IP address.
The factory default
network settings:
IP: 192.168.168.1
Subnet: 255.255.255.0
Gateway: 192.168.168.1
If ‘Static’ Connection Type is selected, the Network Mask must be
entered for the Network. If ‘DHCP’ is chosen this field will not appear
and it will be populated automatically from the DHCP server.
Netmask
Values (IP Address)
255.255.255.0
A SUBNET MASK is a bit
mask that separates the
network and host (device)
portions of an IP address.
The ‘unmasked’ portion
leaves available the
information required to
identify the various devices
on the subnet.
If the Connection Type is set to DHCP, you can use Auto for the DNS
Mode and a DNS server will automatically be defined. If the connection
type is set as static, DNS servers can be manually specified.
DNS Mode
Values (selection)
Auto
Manual
Set the primary and alternate DNS (Domain Name Server) for use by
devices on the LAN port, if required.
Primary DNS / Secondary DNS
Values (selection)
Auto
Manual
