© Microhard Systems Inc.
154
4.0 Configuration
Information Selection
The BulletPlus can report information about the different interfaces it has.
By default the BulletPlus is set to send information about the Carrier, such
as usage and RSSI. Statistical and usage data on the Radio (WiFi),
Ethernet and Serial interfaces can also be reported.
The more that is reported, the more data that is sent to the NMS system,
be aware of data plan constraints and related costs.
Values
(check boxes)
Ethernet
Carrier
Radio
COM
DI / DO
Status
The Web Service can be enabled or disabled. This service is used to
remotely control the BulletPlus. It can be used to schedule reboots,
firmware upgrade and backup tasks, etc.
Values (chars)
Disable/
Enable
Server Port
This is the port where the service is installed and listening. This port should
be open on any installed firewalls.
Values (Port#)
9998
Webclient Setting
Server Type
Select between HTTPS (secure), or HTTP server type.
Values (chars)
HTTPS/
HTTP
Username / Password
This is the username and password used to authenticate the unit.
Values (seconds)
admin/admin
Interval
The Interval defines how often the BulletPlus checks with the NMS System
to determine if there are any tasks to be completed. Carrier data will be
consumed every time the device probes the NMS system.
Values (min)
60
