Microgate WITTI-TAB, Руководство пользователя

Страница: 7 / 33

Microgate Witty TAB User Manual Page 7 of 33
1.2 P
OWER
S
UPPLY AND
B
ATTERY
C
HARGING
Witty TAB comes with two internal lead batteries ensuring an average 10-hour life. The status LED
on the side panel indicates the state of the battery (see table below).
To recharge the display board (or for mains-operated use) connect the power adapter to the
Supply socket and to the outlet. A LED on the power adapter (see below) allows monitoring the
charging process, which is approximately 5 hours.
STATUS STATUS LED on WITTY · TAB
NORMAL Mode
•
Battery charged
•
Low battery
•
Battery completely empty (LED matrix turned off)
Green - steady light
Red - pause
Red - steady light
BOOTLOADER Mode
•
Witty•TAB has been turned on with the ON/OFF
switch by keeping the two buttons (“START STOP” and
“LAP RESET”) pressed
Red - Green
The LED on the power adapter indicates the following statuses:
STATUS STATUS LED on the POWER ADAPTER
•
Charging
•
Charged/maintenance
Yellow
Green