Microgate WITTI-TAB, Руководство пользователя

Страница: 28 / 33

Microgate Witty TAB User Manual Page 28 of 33
2.11 P10 – D
ATE AND
T
IME
This program allows you to display the date and time of the internal Witty·TAB clock. The number
of seconds after which date and time alternate can be defined by the user. To set the exact time
and format (EUUS) see par. 2.20
t __
Insert the number of SECONDS after which date and time alternate (5-60)
2.12 P11 – T
IME
This program allows you to display the time of the internal Witty·TAB clock. To set the exact time
and format (EUUS) see par. 2.20
The two possible date and time formats are as follows:
•
EU = DD.MM.YY HH:MM:SS (24h)
•
US = MM.DD.YY HH:MM:SS AM/PM
2.13 P12 – R
EAC
T
IME
This program allows you to use the ReacTime device from Lynx to display the reaction time. A
special cable (code $CAB172) is necessary to connect the ReacTime to the jack input on the
Witty·TAB.
t __
Insert the duration in number of SECONDS for how long the reaction time should
be visible (5 to 60 seconds, default 10 seconds).
2.14 P13 – C
OUNTDOWN
This program displays a countdown. There are two types of countdowns available from the
program menu:
•
P13 – 0 : Countdown from a total number of seconds.
•
P13 – 1 : Countdown from a specific time of day using the display format “HH:MM:SS”.
t __
Insert the number of SECONDS after which the countdown, once arrived at zero,
gets reset to its configured value (range 0-60 seconds).
C __
In mode 0: Insert the duration in number of SECONDS of the countdown (range 5 –
1000)
xx:xx:xx
In mode 1: Insert the duration of the countdown in the format
hours:minutes:seconds
The countdown starts with the green button S
TART
-S
TOP
or by an external impulse (for example
from a Witty·GATE) and can be reset by pressing L
AP
-R
ESET
.