Microframe Corporation
Series 3500 - MultiPage System
10
Option 3
Re-Page Time for Vibrating Pagers
This is the time between re-pages for Vibrating
Pagers. For example, if the re-page time is set to
one minute, then the Vibrating Pagers will be re-
paged every minute. Using the “
(
“ and “
)
” keys you
can choose between 0 and 25 minutes for the re-
page time. A re-page time of 0 disables re-paging.
When the desired value is selected, press
“ENTER”
to return to the main options menu.
Option 4
Set Display ID Address
The options area is used to tell the MultiPage
Transmitter the address of the UHF Display. The
factory default is 1500. If you change this address, you
will also have to set up the UHF Display to respond
to your new address. (See Display Options.)
Option 5
Base ID
The Base ID is the digital identifi cation in which
all components of a system run. The factory default
for this number is 0500000. This number may be
changed to avoid “cross talk” with other nearby
systems. If you change this ID number, then the
UHF
Display
and Vibrating
Pager
settings will have
to be changed accordingly. It is recommended that
users
do not
change this setting.
NOTE: Pager Base ID can only be changed at
the factory.
Option 6
Baud Rate
This is the rate at which the digital communica-
tions takes place in your system. It is recommended
that users
do not
change this setting. If you change
this number, the
Display
and Vibrating
Pager
set-
tings will have to be changed accordingly.
NOTE: Pager Baud Rate can only be changed
at the factory.
Option 7
Out-of-Range
This feature is available only with coaster sys-
tems. When the out-of-range option is activated,
the transmitter will periodically send a page telling
everyone that they still are in range. If a coaster also
has its out-of-range feature activated, it will sound
an alert within 1 minute of leaving the transmitter’s
coverage area.
Option 8
Behavior
The behavior option exists to accommodate those
users who are more familiar with the DataPage Lite
standard interface and do not need the display or
re-paging capabilities of the MultiPage. The be-
havior setting can be toggled between “MultiPage”
and “DataPage Lite." In DataPage Lite mode, the
re-page feature is disabled and the Transmitter will
simply wait for a Pager number and then page a
Pager. The screen and button behavior will revert
to the DataPage Lite operation.
2.4 HYMN BOARD SETUP
To place the MultiPage transmitter into Hymn
Mode, set the roll-over time to zero (0).
Note:
this
will disable the auto delete and repage functions.
This mode also changes the behavior of the
"ENTER"
and
"SPACE"
buttons when on the main screen. It
is recommended that the roll-over time on the UHF
display also be set to zero (0).
Hymn Mode displays a list of numbers in the
order they are entered. Enter in a list of numbers
to be stored by typing the number and pressing
"ENTER"
. The fi rst number in the list will show
on the MultiPage screen; the UHF Display will be
unaffected. When ready to show the fi rst number
on the UHF display, press the
"ENTER"
key. The
MultiPage will send the current number. To delete
the current number and show the next number listed,
simply press the space key. Repeat until all listed
numbers have been displayed.