Microframe Corporation
Series 3500 - MultiPage System
15
5 POCKET PAGER
5.1 TURNING ON THE PAGER
Hold down the LARGE GRAY BUTTON
until the Pager comes on.
5.2 SENDING A PAGE
Please see the diagram in the MultiPage
section of this manual for detailed instructions
on sending pages.
5.3 ACTIVATING AN ALPHA MES-
SAGE
To activate a pre-defi ned message to a Vibrat-
ing Pager, type in the Pager number followed
by the
"SEND"
key. You will be prompted for
a “BEEP TYPE (1-4).” Select 1-3 here and
press the
“SEND”
key. This will display on the
Pager one of the three pre-programmed text
messages stored in the Pager. If no number is
chosen, the Pager will default to Beep Type 4
(“PAGING”).
5.4 SENDING A NUMERIC MESSAGE
To send a numeric message to a Pager,
simply type in the Pager number followed by
the
“SEND”
key. The Transmitter screen will
display “BEEP TYPE.” Simply press
“ENTER”
to bypass this. The Transmitter screen will
then display “ENTER MESSAGE.” Using the
number keys, type in a numeric message up to
16 digits followed by the
“SEND”
key. Note:
If the message portion of a page is not blank
the “BEEP TYPE” alpha message selected will
be ignored.
5.5 RECEIVING A PAGE
The Pocket Pager will start to vibrate
when it is paged. No action is necessary on
the receiving end. The Pager will stop vibrat-
ing after approximately eight seconds. If the
user would like to stop the vibration before
the eight seconds, simply press the LARGE
GRAY BUTTON. If a numeric message is sent
to the Pager, the message will be visible on
the Pager's LCD screen until the Pager stops
vibrating. To view the message after the Pager
has stopped vibrating, press the LARGE GRAY
BUTTON once.
5.6 SENDING A GROUP CALL PAGE
All Pagers respond to call number “900”
(unless another group call number has been
chosen by the customer and programmed at
the factory). To page all Pagers at once, simply
enter “900” and
"SEND."
Then press
"SEND"
again at the beep type prompt.
5.7 MANUAL PAGER TURN-OFF
Press the DOWN ARROW BUTTON four
times. The words “PGR OFF” will appear
on the LCD screen. Press the LARGE GRAY
BUTTON once to confi rm. NOTE: If you have
chosen to order the Pagers with the on/off but-
ton disabled, then Pagers can only be turned
off from the Transmitter.
5.8 PAGER TURN-OFF FROM BASE
Enter the pager number followed by the
“SEND”
key.
Press
“ENTER”
to bypass “BEEP TYPE”
screen. When screen reads “ENTER MES-
SAGE,” enter the message code
“
(0091)(0)
”
fol-
lowed by
“SEND.”
NOTE:
In order for the code
to work, the parentheses must be entered.
Since all Pagers respond to call number
“900,” paging “900” with the message code
“(0091)(0)” will turn all Pagers off.
5.9 POWER CHECKING
When the battery level is low, a low-battery
symbol will appear at the bottom of the Pager
screen.
5.10 LIGHTING FUNCTION
Pressing the UP ARROW BUTTON for two
seconds will turn on the backlight on the LCD
screen. The light will shut off automatically
after approximately 10 seconds, or the user
may turn the light off manually by pressing
the UP ARROW BUTTON once.
5.11 CAUTION
a) The
Pager is made up of LCD and
precision elements. Avoid water and
high temperature.
b) Remove
the battery if the Pager will
not
be in use for a long period of time.
c) If
the Pager is not working properly,
do not dismantle or repair it yourself.
Call Microframe for technical service.