8
Microframe Corporation
Series 3400 - Coaster Call Paging System
Figure 1: Connection Diagram
2 COASTER SETUP
2.1 CONNECTING THE BASE
Place the black charging base in a sturdy,
out-of-the-way location. If connecting multiple
bases, use the jumper wires to connect power
from one base to another (See Figure 1). Plug
the small tip from the power supply into the fi rst
charger base and then plug the power adapter's
electrical cord into a standard 110 outlet.
2.2 SETTING UP COASTERS
Stack the coasters on the black charging
base. The coaster number will always face
the front and the red charge indicator light
will be on the left. We recommend that you
do not stack coasters more than 15 high, as
damage to the charger base may occur. A red
light should appear on each coaster to indicate
proper charging. The supplied 12v AC power
adapter supports up to four charging bases
joined together by jumper wires. (see diagram
below) Additional 12v AC power adapter's can
be purchased through Microframe when adding
more charging bases.
