Microframe Corporation
Series 3061 - DataTrack Waiter Call
8
1.3 POP-OUT FACEPLATE
The Datatrack faceplate comes preinstalled
with adhesive mounting tape on the inside edge
of the panel. This allows the panel to be popped
out and rotated 180 degrees for wall installa-
tions. For table top installations the panel may
be affixed in its normal position. To perma-
nently secure the panel, remove the paper from
the tape and press the faceplate into position.
1.4 PRECAUTIONARY STEPS
A. Avoid placing the DataTrack in the imme-
diate vicinity of telephone exchanges or com-
puter equipment.
B. Also remember that the performance of
the system will be affected by the type of
material the unit is mounted on and its sur-
roundings.
C. The following is a list of materials that
this transmitter will be adversely affected by if
placed in close proximity to:
a) Foil backed wallboard
b) Metal mesh or wire reinforced glass
c) Metal sheeting, large mirrors, or
suspended ceilings
d) Elevator shafts
All of the above can reflect radio waves and
thereby reduce the capability of the transmitter
to perform its desired functions.
D. The circuit boards within this equipment
may be harmed by Electrostatic Discharge (ESD).
There are no user serviceable parts, and re-
moval of the unit’s cover will invalidate any
warranty unless undertaken by an authorized
engineer.
Warning!
Never transmit without an an-
tenna attached to the transmitter.
Diagram 2: Desk Mounted DataTrack
