Nabi User Manual
www.md-best.com
All Rights Reserved
Procedure
1. Proceed to the Measurement page under the Protein menu
2. Insert the title of the measurement.
3. Set a blank value for the measurement. (Refer to pg. 8)
(In Others, Users have to set the wavelength before setting the blank value)
4. Set the Standard Curve for the measurement. (Refer to pg. 16)
5. Pipette microvolume of the target sample on the Lower Pedestal, and close the Head.
6. Touch Read button to start the measurement.
7. Check the results on the screen. The resulting data will be saved automatically,
and can be searched in the search panel.
20
3. User Interface
Title
Title of the measurement.
Conc.
Shows the concentration of the sample.
260nm (10mm path)
Shows the Abs. Value at 260nm.
280nm (10mm path)
Shows the Abs. Value at 280nm.
Direct UV Measurement page is to perform Direct UV measurement on protein samples.
Unlike other protein sample measurements, Standard Curve is not necessary.
Direct UV Page
