Microcom 470, Руководство оператора

Страница: 48 / 124

Designing Labels Using LDS Chapter 4
))))))))))))))))))))))))))))))))))))))))))))
))))))))))))))))))))))))))))))))))))))))))))
470 Operators Manual
40
4.5.8 A SAMPLE SESSION (FIELDS)
Looking at the sample label...
^D57
5
4,812,609,,20,48,,,
5
1,100, 40, 4, 1,4
5
2,100, 60,17, 1,4
5
3,100,100, 5, 1,6
5
3,100,150, 5,16,2,,,,30
5
^D56
5
^D2
5
EASY
5
MICROCOM MAKES IT
5
HELLO
5
^D3
5
A label format is coming
Header Information
Field #1 information
Field #2 information
Field #3 information
Field #4 information
Select RAM Format
Text Data is Coming
Text String #1
Text String #2
Text String #3
Print Label
... and referring to Field #1.
1,100, 40, 4, 1,4
5 5
1 - Field refers to text string #1 - EASY . This field
could have referred to HELLO , if it had a TSN of
3. The fields do not have to be in any kind of
order with respect to the data fields.
100 - X beginning (XB) 100 dots from left side of label.
40 - Y beginning (YB) 40 dots from bottom of label.
4 - Character Count (CC) of 4 characters, the amount
of characters in
EASY .
1 - A TCI of 1 indicates that the data will appear on
the label as text, an ASCII string, as opposed to,
for example, a bar code.
4 - This CGN selection of 4 selects a font size of 7
dots high by 5 dots wide. This is the size of
each character in the word
EASY as it appears on
the label.
5 5
- A carriage return signals the end of this field.
The field parameters that were not defined will default. A FO and FJ of 0 will place EASY to
the right of the X coordinate with a rotation of 0 degrees. CMX and CMY will default to 1, so
the character will be the size as defined by the font. The TSN is 1, therefore the entire word
EASY will print (a TSN of 2 would have printed ASY). CLX and CLY will default to 5 and 7,
respectively, so a full character will be printed.