Microcom 410 ECA, Руководство оператора

Страница: 54 / 82

Printer Commands Chapter 5
))))))))))))))))))))))))))))))))))))))))))))
))))))))))))))))))))))))))))))))))))))))))))
48 410 ECA Operators Manual
5.3.10 MISCELLANEOUS PRINTER COMMANDS
^A
^D Command
2 Text string entry mode: Precedes the text strings that are supplied to the various
fields in the tag. Text strings must be followed by a carriage return. (Equivalent to
^B)
5 Send Printer Status: See section 5.3 (Equivalent to ^E)
29 Printer Statistics: The information produced is equivalent to the status tag in
section 2.1.3.
0 Print statistics to serial port
1 Print statistics on a tag
2 Clear the printed labels variable in the statistics
3 Clear the printed inches variable in the statistics
32 Soft Reset: Restores printer to power-up settings.
0 Reset printer and restore previous autosize values.
1 Reset printer without autosizing or restoring previous autosize values.
33 Display Model and Revision Number: Displays important reference numbers to
the screen.
35 Contrast Window Adjust: Adjusts to a percentage of current contrast base. Used
for slight variations in paper and should be turned down for ladder style (vertical)
barcodes. If this command does not sufficiently lighten or darken the contrast, use
the Adjust Contrast Base command (^D36, section 5.3). Values for ^A are shown
below:
1 60% of Base
2 70% of Base
3 80% of Base
4 90% of Base
5 Base (default)
6 110% of Base
7 120% of Base
8 130% of Base
9 140% of Base
XX 55 Select Default Tag Layout: Select from the ROM power-up tag layout. Only used
if there is a special lay-out burned into the ROM by Microcom. ^A selects which
one (1-8), if more than one are present.