RN4870/71 PICtail™/PICtail Plus Daughter Board User’s Guide
DS50002547A-page 22
2016 Microchip Technology Inc.
3. After any Set commands issued, the RN4870/71 module needs a device reboot
(
R,1
) for the changes to take effect.
To verify the configuration settings, perform the following steps:
a) Type
$$$
to enter Command mode
b) Enter
+
to turn on local echo
c) Issue command
D
to display the settings
d) Note the name of the device
BLE-b1b0
where b1b0 are the low order bytes
of the BT address; in this example, the Bluetooth is set to
BLE-C071
e) Verify that the services field is set to
C0
; refer to
FIGURE 3-5:
CONFIRM NEW SETTINGS IN COMMAND MODE
3.4
CONNECTING TO THE RN4870/71 USING SMARTDISCOVER APP
The RN4870/71 features can be demonstrated by using the SmartDiscover App.
To connect the RN4870/71 using SmartDiscover App, perform the following steps:
1. Configure the RN4870/71 PICtail according to the steps in
Section 3.3 “Changing Settings Using ASCII Commands”
. Connect it to the
host PC and type
$$$
to
enter Command mode.
2. Download and install the SmartDiscover App on your device. See
for
example of SmartDiscover App icon.
FIGURE 3-6:
SMART DISCOVER ICON
