Microchip Technology RN1810, Руководство пользователя

Страница: 30 / 38

RN1810/RN1810E
DS50002460C-page 26

2016-2021 Microchip Technology Inc.
4.8 Taiwan
The RN1810/RN1810E module has received compli-
ance approval in accordance with the Telecommunica-
tions Act. Customers seeking to use the compliance
approval in their product should contact Microchip
Technology sales or distribution partners to obtain a
Letter of Authority.
Integration of this module into a final product does not
require additional radio certification provided installa-
tion instructions are followed and no modifications of
the module are allowed.
4.8.1 LABELING AND USER
INFORMATION REQUIREMENTS
The RN1810/RN1810E module is labeled with its own
NCC ID number, and if the NCC ID is not visible when
the module is installed inside another device, then the
outside of the device must also display a label referring
to the enclosed module. This exterior label can use
wording such as the following:
The user's manual should contain below warning (for
RF device) in traditional Chinese:
注意
!
依據 低功率電波輻射性電機管理辦法
第十二條 經型式認證合格之低功率射頻電
機，非經許可，
公司、商號或使用者均不得擅自變更頻率、
加大功率或變更原設計
之特性及功能。
第十四條
低功率射頻電機之使用不得影響飛
航安全及干擾合法通信；
經發現有干擾現象時，應立即停用，並改善
至無干擾時方得繼續使用。
前項合法通信，指依電信規定作業之無線電
信。
低功率射頻電機須忍受合法通信或工業、科
學及醫療用電波輻射性
電機設備之干擾。
4.8.2 EXTERNAL ANTENNA
REQUIREMENTS
The Taiwan compliance testing was performed using
the antenna types listed in
Table 3-1 .
4.8.3 HELPFUL WEB SITES
National Communications Commission (NCC):
http://www.ncc.gov.tw .
4.9 Other Regulatory Jurisdictions
Should other regulatory jurisdiction certification be
required by the customer, or the customer need to
recertify the module for other reasons, a certification
utility is available. For further regulatory Certification
Utility and documentation, contact your local Microchip
Technology sales office.
PENDING