Microchip Technology RN1810, Руководство пользователя

Страница: 29 / 38


2016-2021 Microchip Technology Inc. DS50002460C-page 25
RN1810/RN1810E
• If the host product is subject to electrical appli-
ance safety (for example, powered from an AC
mains), the host product may require Product
Safety Electrical Appliance and Material (PSE)
testing. The integrator should contact their confor-
mance laboratory to determine if this testing is
required.
• There is a voluntary Electromagnetic Compatibil-
ity (EMC) test for the host product administered
by VCCII:
http://www.vcci.jp/vcci_e/index.html
4.6.1 LABELING AND USER
INFORMATION REQUIREMENTS
The label on the final product which contains the
RN1810/RN1810E module must follow Japan marking
requirements. The integrator of the module should refer
to the labeling requirements for Japan available at the
Ministry of Internal Affairs and Communications (MIC)
website.
The RN1810/RN1810E module is labeled with its own
technical conformity mark and certification number.
The final product in which this module is being used
must have a label referring to the type certified module
inside:
4.6.2 HELPFUL WEB SITES
Ministry of Internal Affairs and Communications (MIC):
http://www.tele.soumu.go.jp/e/index.htm
Association of Radio Industries and Businesses
(ARIB):
http://www.arib.or.jp/english/
4.7 Korea
The RN1810/RN1810E module has received certifica-
tion of conformity in accordance with the Radio Waves
Act. Integration of this module into a final product does
not require additional radio certification provided instal-
lation instructions are followed and no modifications of
the module are allowed.
4.7.1 LABELING AND USER
INFORMATION REQUIREMENTS
The label on the final product which contains the
RN1810/RN1810E module must follow KC marking
requirements. The integrator of the module should refer
to the labeling requirements for Korea available on the
Korea Communications Commission (KCC) website.
The RN1810/RN1810E module is labeled with its own
KC mark. The final product requires the KC mark and
certificate number of the module:
4.7.2 EXTERNAL ANTENNA
REQUIREMENTS
The Korea compliance testing was performed using
the antenna types listed in Table 3-1 .
4.7.3 HELPFUL WEB SITES
Korea Communications Commission (KCC):
http://www.kcc.go.kr .
National Radio Research Agency (RRA):
http://rra.go.kr.
Contains transmitter module with certificate number:
PENDING
KCC-CRI-029-RN-171
PENDING