Microchip Technology RN1810, Руководство пользователя

Страница: 28 / 38

RN1810/RN1810E
DS50002460C-page 24

2016-2021 Microchip Technology Inc.
RN1810/RN1810E module test reports can be used as
part of the product certification and compliance folder.
For more information on the RF transmitter test reports,
contact Microchip Technology Australia sales office.
To meet overall Australian final product compliance, the
developer must construct a compliance folder contain-
ing all relevant compliance test reports e.g. RF, EMC,
electrical safety and DoC (Declaration of Conformity)
etc. It is the responsibility of the integrator to know what
is required in the compliance folder for ACMA compli-
ance. All test reports are available on the RN1810/
RN1810E product web page at
http://www.micro-
chip.com . For more information on Australia compli-
ance, refer to the Australian Communications and
Media Authority web site
http://www.acma.gov.au/ .
4.4.1 EXTERNAL ANTENNA
REQUIREMENTS
The compliance testing listed in Table 4-1 was per-
formed using the antenna types listed in Table 3-1 .
4.4.2 HELPFUL WEB SITES
The Australian Communications and Media Authority:
www.acma.gov.au/ .
4.5 New Zealand
The New Zealand radio regulations do not provide a
modular approval policy similar to the United States
(FCC) and Canada (IC). However, RN1810/RN1810E
module RF transmitter test reports can be used in part
to demonstrate compliance against the New Zealand
“General User Radio License for Short Range
Devices”. New Zealand Radio communications (Radio
Standards) Notice 2010 calls up the AS / NZS
4268:2008 industry standard. The RN1810/RN1810E
module test reports can be used as part of the product
certification and compliance folder. All test reports are
available on the RN1810/RN1810E product web page
at
http://www.microchip.com . For more information on
the RF transmitter test reports, contact Microchip Tech-
nology sales office.
Information on the New Zealand short range devices
license can be found in the following web links:
http://www.rsm.govt.nz/cms/licensees/types-oflicence/
general-user-licences/short-range-devices
and
http://www.rsm.govt.nz/cms/policy-and-planning/spec-
trum-policy-overview/legislation/gazette-notices/prod-
uct-compliance
.
To meet overall New Zealand final product compliance,
the developer must construct a compliance folder con-
taining all relevant compliance test reports e.g. RF,
EMC, electrical safety and DoC (Declaration of Confor-
mity) etc. It is the responsibility of the developer to
know what is required in the compliance folder for New
Zealand Radio communications. For more information
on New Zealand compliance, refer to the web site
http://www.rsm.govt.nz/ .
4.5.1 EXTERNAL ANTENNA
REQUIREMENTS
The compliance testing listed in Table 4-1 was per-
formed using the antenna types listed in Table 3-1 .
4.5.2 HELPFUL WEB SITES
Radio Spectrum Ministry of Economic Development:
http://www.rsm.govt.nz/ .
4.6 Japan
The RN1810/RN1810E module has received type cer-
tification and is labeled with its own technical confor-
mity mark and certification number as required to
conform to the technical standards regulated by the
Ministry of Internal Affairs and Communications (MIC)
of Japan pursuant to the Radio Act of Japan.
Integration of this module into a final product does not
require additional radio certification provided installa-
tion instructions are followed and no modifications of
the module are allowed. Additional testing may be
required: