PolarFire MPF300T FPGA Video Kit
50200872 UG0872 User Guide Revision 1.0
10
Figure 5 • SPI Flash Interface
The SPI flash specifications for the PolarFire device are:
Density: 1 Gb
Voltage: 2.7 V to 3.6 V (MT25QL01GBBB8ESF-0SIT)
Frequency: 90 MHz
Quantity = 1
SPI mode support: Modes 0 and 3
4.3
HDMI1.4 Interface
One HDMI1.4 Transmitter is connected to the PolarFire device to support the HDMI1.4 standard as
shown in the following figure.
Figure 6 • HDMI1.4 Interface
The HDMI interface is implemented in Bank6.
The HDMI1.4 transmitter specifications for the PolarFire device are:
Part Number of the HDMI Transmitter: ADV7511KSTZ
Operating frequency: up to 225 MHz
4.4
MIPI-RX Connector (CSI-2 Application)
The video board supports a dual Camera image sensor daughter card that can be connected using the
CSI-2 RX interface (J5) for CSI-2 RX applications. The daughter card includes two IMX334 cameras. Each
image sensor supports a four-lane MIPI interface. The daughter card is connected to the video board via
the board to board connector as shown in the following figure
The MIPI output signals
. (see page )
are connected to Bank 2.
The image sensor supports maximum 1782 Mbps.
