EVBPCBA Documentation
2013 Microchip Technology Inc.
DS00001574A-page 25
2.7.1
Placing a Chip in the Socket
This section is applicable only if the ASIC is not directly soldered on the PCB and the
EVB is equipped with a socket. The following guidelines must be followed when replac-
ing the ASIC in the socket.
Place the ASIC in the socket in such a way that the Pin1 marking (dot) on the ASIC and
the socket Pin1 marking on the PCB (triangle) align, as shown in Figure 2-7.
Note:
The socket is manufactured by R&D Interconnect (P/N:
106458-0134).
FIGURE 2-7:
EVB-SEC1110 PIN 1 SOCKET ALIGNMENT
