EVB-LAN9252-ADD-ON for Beckhoff EL9800 User’s Guide
DS50002356B-page 14
2015 Microchip Technology Inc.
2.3
CLOCK
LAN9252 requires a fixed-frequency 25MHz clock source for use by the internal clock
oscillator and PLL. This is typically provided by attaching a 25MHz crystal to the OSCI
and OSCO pins.
2.4
CONFIGURATION
The following sub-sections describe the various board features and configuration set-
tings. A top view of the EVB-LAN9252-ADD-ON REV-B is displayed in
.
FIGURE 2-1:
EVB-LAN9252-ADD-ON TOP VIEW WITH CALLOUTS
The EVB-LAN9252-ADD-ON connects with the Beckhoff EL9800 EtherCAT Base
Board as depicted in
39
SOF
46
OE_EXT
40
OUTVALID
47
NC
41
SYNC/LATCH0
48
VCC_5V_IN
42
NC
49
3V3
43
LATCH_IN
50
VCC_5V_IN
44
SYNC/LATCH1
51
TP3
45
GND
52
TP2
TABLE 2-1:
EVB-LAN9252 CONNECTOR J202 PIN OUT (CONTINUED)
Pin
Number
Signal
Pin
Number
Signal
Note:
Pins 53-56 are NC.
Board to Board Connector (J202)
DIGIO/SPI
Selection Switches
Microchip
LAN9252
25 Mhz
Crystal
LDO
EEPROM
Port 1
(with integrated
magnetics &LEDs)
Port 0
(with integrated
magnetics &LEDs)