EVB-KSZ9563 Evaluation Board User’s Guide
DS50002726A-page 12
2018 Microchip Technology Inc.
2.4.2
Manual Reset
The SW1 reset button can be pressed and released to provide manual reset to the
KSZ9563 device after power-up. Refer to
and the board schematics in
for details.
2.5
BOARD FEATURES AND CONFIGURATION
The following sub-sections describe the board features and configuration settings.
displays the top view of the EVB-KSZ9563 with key features, jumpers, and
headers highlighted in red, and with Microchip components highlighted in blue.
FIGURE 2-1:
EVB-KSZ9563 TOP VIEW WITH CALLOUTS
5V Power LED
(from ModuLAN
connector, J7)
SW1
(reset button)
GPIO signals
(for 1588/AVB)
Quiet-WIRE
(pin strapping)
INTRP_N output
(signal/LED)
PME_N output
(signal/LED)
IBA Mode
(pin strapping)
PHY Port 1
LED Status
PHY Port 2
LED Status
PHY Port 1
10/100/1000
Magnetic
Jack
PHY Port 2
10/100/1000
Magnetic
Jack
Microchip
MIC33153YHJ
Buck Regulator
Microchip
DSC1001CI2-025.0000
MEMS Oscillator
Microchip KSZ9563
3-port Gigabit
Ethernet Switch
