6.
Appendix: B Regulatory Approval
This equipment (WFI32-IoT Board/EV36W50A) is an evaluation kit and not a finished product. It is intended for
laboratory evaluation purposes only. It is not directly marketed or sold to the general public through retail; it is only
sold through authorized distributors or through Microchip. Using this requires a significant engineering expertise
towards understanding of the tools and relevant technology, which can be expected only from a person who is
professionally trained in the technology.
Regulatory compliance settings have to follow the WFI32E01PC module certifications. The following regulatory
notices are to cover the requirements under the regulatory approval.
6.1
United States
The WFI32-IoT Board (EV36W50A) contains the WFI32E01PC module, which has received Federal Communications
Commission (FCC) CFR47 Telecommunications, Part 15 Subpart C “Intentional Radiators” single-modular approval
in accordance with Part 15.212 Modular Transmitter approval.
Contains FCC ID: 2ADHKWFI32E01
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation
.
Important:
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for uncontrolled environment. The
antenna(s) used for this transmitter must be installed to provide a separation distance of at least 8 cm from
all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
This transmitter is restricted for use with the specific antenna(s) tested in this application for certification.
CAUTION
Any changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate this equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
6.2
Canada
The WFI32-IoT Board (EV36W50A) contains the WFI32E01PC module, which has been certified for use in Canada
under Innovation, Science and Economic Development Canada (ISED, formerly Industry Canada) Radio Standards
Procedure (RSP) RSP-100, Radio Standards Specification (RSS) RSS-Gen and RSS-247.
EV36W50A
Appendix: B Regulatory Approval
©
2022 Microchip Technology Inc.
and its subsidiaries
User Guide
DS50003262A-page 31
