Figure 3-3. WFI32-IoT Board (EV36W50A) – Recovery Method
Connector (J301)
2.
Open the latest version of MPLAB X IDE.
3.
The following figure illustrates the opening window of the MPLAB X IDE. From the “Debug” drop-down list,
select
Hardware Tool Emergency Boot Firmware Recovery
.
Figure 3-4. MPLAB
®
X IDE Opening Window
4.
Follow the instructions shown in the preceding figure to bring the tool back to factory condition. For additional
information on the MPLAB PKOB4, refer to the
MPLAB
®
PICkit
™
4 In-Circuit Debugger User's Guide
(
MPLAB Snap In-Circuit Debugger User's Guide
(
3.3
USB Connectivity
The WFI32E01PC module has an integrated full-speed USB peripheral. This feature enables the user to implement
USB functionality through the Micro-AB USB connector (
) on the WFI32-IoT board.
EV36W50A
Hardware
©
2022 Microchip Technology Inc.
and its subsidiaries
User Guide
DS50003262A-page 11
