Figure 3-13. Read Local Information
7.
To begin advertising, enter the ‘GAP’ tab, under the ‘GAP Command’ section, select the following options for
each field (see following figure):
7.1.
Select “0x1C: Set Adv Enable” for Opcode field.
7.2.
Select “0x01: Enter Standby Mode” for the Standby mode field.
7.3.
Click “Send”.
8.
Once the module enters the Standby mode (started advertising), the BT Status field will be updated (see the
following figure).
BM71-XPro
Module Configuration
©
2019 Microchip Technology Inc.
DS50002891A-page 16
