...........continued
Connector
Interfaces to
J5
VTH Signal Supervising (Not populated)
J6
Ethernet RJ45 connector
J8
Disable QSPI Boot Memory (closed=disabled)
J9
Standard SDMMC0 connector
J10
USB-A MicroAB connector
J11
USB-B type A connector
J12
HSIC Strobe Line U.FL connector (Not populated)
J13
HSIC Data Line U.FL connector (Not populated)
J14
VLDO2 Voltage Measurement (Not populated)
J15
VDD_1V8 Voltage Measurement (Not populated)
J16
VDD_MAIN WLSOM1 Current Measurement
J17
VDDBU WLSOM1 Current Measurement
J18
ISC connector (Not populated)
J19
mikroBUS1 connectors
J20
mikroBUS2 connectors
J21
Expansion TFT LCD connector for display module
J22
Tamper and analog comparator connector
J23
Expansion XPRO 1 connector for PTC features
J24
Expansion XPRO 2 connector for PTC features
J25
JTAG Debug Connector
J26
UART FTDI Debug Connector
J27
WILC FTDI Debug Connector (Not populated)
3.4
Function Blocks
3.4.1
Wireless SOM (ATSAMAD27-WLSOM1)
The ATSAMA5D27-WLSOM1 main features are listed below.
Refer to the ATSAMA5D27-WLSOM1 data sheet for more information.
3.4.1.1
Features
• System-In-Package (ATSAMA5D27C-LD2G-CU) Including:
– Arm
®
Cortex
®
-A5 processor-based SAMA5D27 MPU
– 2 Gbit LPDDR2 SDRAM
• On-Board Power Management Unit (MCP16502AC-E/S8B)
• 64 Mb Serial Quad I/O Flash Memory (SST26VF064BEUIT-104I/MF) with Embedded EUI-48
™
and EUI-64
™
MAC Addresses
• IEEE
®
802.11 b/g/n Wi-Fi plus Bluetooth (Wi-Fi/BT) Module (ATWILC3000-MR110UA)
• 10Base-T/100Base-TX Ethernet PHY (KSZ8081RNAIA)
• ATECC608A Secure Element
ATSAMA5D27-WLSOM1-EK1
Baseboard Components
©
2019 Microchip Technology Inc.
User Guide
DS50002931A-page 9