9
/
30
2.1.6. Product Connection Check
After all connections of the miner are connected and screws are tightened, check again to
confirm that the connection is correct.
2.2. Miner Handling and Racking Notes
When in the process of handling and racking the miner, it is strictly forbidden to
use the data cable, the power supply control wire or the fan wire as a load-bearing
handle of the miner. Lifting the machine and power supply via its cables will result
in damage to the connections, loose connections, and physical damage to the
control panel. The resulting hardware damage and malfunctions will not be
covered by the warranty!
3. Miner Configuration Environment
Preparation
3.1. Miner Configuration Equipment List
#
Tool
Numb
er
Use
Remark
