QD-DVD Series
13
Total: 4 Trk 12m:43s
*Track 6: 3m:56s
Microboards B.30
13. AutoCopy
Microboards B.30
14. Shutdown
Total: 0 Trk 0m:00s
Track 1: 4m:24s
Microboards B.30
11. Setup
Microboards B.30
12. Utilities
After the master audio disc is analyzed and any blank discs recognized, you will be able to select
tracks from the master by using the
▼▲
buttons to navigate through the tracks and pressing
ENT
to select the tracks you want to burn.
The top line of the display will show the number of tracks
currently selected and the total time of selected tracks. The
bottom line of the display will show the track number and time for
the current track.
If a track is selected for the audio mix, the bottom line will begin
with an asterisk ( * ). In the example to the right, 4 tracks have
been selected, totaling 12 minutes 43 seconds; track 6 is 3
minutes and 56 seconds in length and has been selected for burning, as indicated by the asterisk.
When you use the
▼▲
buttons to go past the last track, you will be asked if you are done. Press
ENT
to burn the selected tracks from the current master to the blank media, or
ESC
to add more
tracks from the same master. If you want to add tracks from another audio CD, you will have to
burn the selected tracks from the current master before doing so.
After pressing
ENT
to burn the tracks, you will be asked if you are finished mixing. If you are,
press
ENT
and the burned discs will be finalized. If you want to add tracks from another audio
CD, press
ESC
and you will be asked to insert the next master. Follow the same procedure to
select and burn tracks for each master disc.
Discs must be finalized before they will be playable.
Please note that the Mix Audio Tracks function cannot be performed with the
CD+G Support
setting ON.
Setup
If your QD-DVD Series Duplicator does not include a hard drive,
the display will show this menu item as 10, not 11.
The Setup menu includes many functions that affect the operation of the QD-DVD Duplicator.
Please see page 14 for more information on the Setup menu options.
Utilities
If your QD-DVD Series Duplicator does not include a hard drive,
the display will show this menu item as 11, not 12.
The Utilities menu provides you with hardware information and a few maintenance functions.
Please see page 16 for more information on the Utilities menu.
AutoCopy
If your QD-DVD Series Duplicator does not include a hard drive,
the display will show this menu item as 12, not 13.
The AutoCopy function simplifies the copy process. After the
initial round of blanks is burned, you only need to load the drives
again and close them. Once the drives detect the new blank media in the drives, duplication
begins without you having to touch the control panel (Auto Start must be set to
Auto
or
Full
).
Shutdown
If your QD-DVD Series Duplicator does not include a hard drive, the display will show this menu
item as 13, not 14.
When turning off your QD-DVD Duplicator, it is highly
recommended that you do so using the Shutdown menu option.
Not only does this function save any system settings that you
may have changed in the Setup menu, it also shuts down the
duplicator components in a safe way.
When the display reads
Ready to Power OFF
after selecting the Shutdown function, you can use
the power switch on the front.
Содержание QD-DVD
Страница 1: ...QD DVD Series User s Manual www microboards com Version 3 1...
Страница 2: ...Microboards Technology LLC 2...
