MicroAir Avionics T2000SFL, Руководство по установке

Страница: 11 / 23

Microair Avionics T2000SFL Transponder Installation Manual
T2000SFL Installation Manual 01R7-1 Page 11 of 23 25
th
7.0 CALIBRATION OF INSTALLATION
Please refer to the Civil Aviation rules or regulations for your country to determine what the calibration
requirements are, for a transponder installation.
Most countries will require a test of the installation to be carried out by a qualified test centre, along with a
calibration of the encoder and altimeter in the aircraft.
This test is typically repeated every two years, to ensure the ongoing accuracy of the system.
Refer to FAA FAR Part 43 appendix E and F for typical transponder/encoder/altimeter equipment calibration
procedures.
IMPORTANT NOTE
It is vital to aircraft safety that all transponder/encoder/altimeter
systems, which will operate within an SSR system or interact with TCAS
equipped aircraft, perform to a minimum civil aviation standard.
For this reason Microair strongly recommends that all transponder
installations be calibrated at the time of installation, and at periods of
not greater than two years thereafter.