Micro Seven VM10a, Руководство оператора

Страница: 24 / 32

24
Chapter 5
Changing Voice Segment
Voice segments for announcing digital multi-meter result may be changed to your own voice by
the following procedures:
For changing 0.5 seconds voice segments like 0-9, click the “Normal Mode” button. The sign
“Short voice” is displayed. There are four buttons as follows:
”Audio On” must be on; otherwise, click the button.
Voice segment name as “zero”, “one”, etc. for clicking for next voice segment.
”Play voice” button to play the sound of the voice segment name.
”Record Voice” button to record your voice for the voice segment name.
If there is no recording sound detected after clicking the “Record Voice” button, there is no
change in voice segment.
After finishing 0.5 seconds voice segment changes, click the two seconds voice segment
change or click the “Short Voice” button to advance to “Long Voice”.
In the “Long Voice”, the voice segment becomes two seconds like ”Volt DC”, “Volt RMS”, etc.
and procedure for changing two-second voice segment is the same as 0.5 seconds voice
segment s.
After finishing the “Long Voice”, click the “Long Voice” multiple time until “Normal Mode” is seen.