Micro Matic Wine Saver HOME, Руководство по эксплуатации

Страница: 5 / 12

4
1. Push to open the compartment door of the WSH
Rack. The door will release and can be swung open.
2. Thread the WSH Argon Gas cylinder into the WSH regulator
unit. Turn clockwise until you begin to feel slight
resistance. At this time, you will be piercing the seal of
the cylinder to activate the WSH Argon Gas. Continue
threading the cylinder clockwise until it is fully seated.
You are now ready to operate your Wine Saver HOME system.
Place a glass under the Tap Head nozzle and simply press on
the tap lever, while holding the bottle stable. Wine will begin to
flow at a rate of approximately 1 oz per second. Check all Tap Heads
for proper operation and wine flow. You may have decreased flow
during the first seconds of each bottle as the system is primed with
gas. This is by design, to purge your Wine Saver HOME system.
CHARGING YOUR WINE SAVER HOME WITH WSH ARGON GAS CYLINDERS
Note: WSH Argon Gas cylinders are under 2800 lbs/sq. inch of pressure.
Do not remove or unscrew a full or partial WSH Argon Gas cylinder until
it is empty. If you do so, the content will be lost as the gas is released
through a safety relief valve designed to avoid injury.
Push Here
to Open