Micro Matic PREMIUM PLUS 8011X-PP, Инструкция

Страница: 4 / 28

ENGLISH
4
How to remove the
regulator and change
the gas cylinder
1. Close the dispense head.
2. Close the valve of the gas
cylinder.
3. Set the regulating pressure
to 0 (zero) by turning the
adjusting screw and close
the shut off valve (if existing).
4. Take the regulator off by
unscrewing the connection
nut from the gas cylinder and
place the regulator in a safe
place. (With gas pressure
inside, there is a possibility
of a small gas escape).
5. Change the gas cylinder.
Undo the cylinder safety
chain, replace the empty
cylinder by a full one, and
secure with the safety chain.
6. Clean out dust on the gas
outlet of the gas cylinder
(see point 2 in section
“Instruction How to Mount the
Regulator”).
7. Check the sealing
(see point 3 in section
“Instruction How to Mount the
Regulator”)
.
8. Set up the regulator to the
gas cylinder
(see point 4 in section
“Instruction How to Mount the
Regulator”).
9. Open the valve of the gas
cylinder
(see point 7 in section
“Instruction How to Mount the
Regulator”).
10. Check for leakage.
11. Set the regulating pressure
to a suitable pressure and
open the shut off valve (if
existing).
12. Open the dispense head.
Technical data/features
This product is designed to be
compact, accurate, durable,
and safe. It is available for
either Primary or Secondary
applications, with options
available for CO
2
, N
2
or Mixed
Gas.
This product is a non-service
product. A “intact” tamper
evident ring on the body is
showing that the regulator has
not been opened.
The pressure is adjusted with
the 4 mm Allen key included in
the packaging. The included
tamper evident cap can be fitted
after pressure adjustment or
the Allen key can be left on the
regulator for further adjustment.