Page 44
thermoMETER TIM 8 / thermoIMAGER TIM 40
TIM 8
Fig. 24 Electrical installation for autonomous operation of thermoMETER TIM 8
i
- Autonomous operation also works via the industrial PIF of the thermoMETER TIM 8. The device is
powered by the power supply of the PIF.
- Up to 9 measure areas can be output autonomously (firmware 3013 or higher required). The use of
three stackable PIFs is required. Three analog outputs are possible per stackable PIF.
Note:
The first three measurement areas 1 - 3 have a response time of 20 ms, the measurement areas
4 - 6 a response time of 40 ms and the measurement areas 7 - 9 a response time of 60 ms.
- Autonomous mode cannot be set using the
Main measure area
function. To output a measure
area autonomously, the function
Measure area
must be used.
