Page 4
scanCONTROL 2910/2960BL
6.
Connections, LED Indication
1
2
1 Ethernet port
2 Multifunction port (Power supply, I/O)
Multifunction Port
Designation
Sensor con-
nector pin
Cable color
PCR3000-x
Notes
+Ub
9
Red
+ 11 V - 30 V DC
(rated value 24 V); max. 5 W
GND
2
Blue
0 V
+Laser on/off
3
White
Available with SI option
-Laser on/off
1
Brown
RS422
12
Red-blue
RS422
input or output
/RS422
11
Gray-pink
In1
6
Yellow
Switching input In1
GND-In1
4
Green
Ground connection In1
In2
5
Pink
Switching input In2
GND-In2
8
Gray
Ground connection In2
In3
10
Purple
Switching input In3
GND-In3
7
Black
Ground connection In3
Shield
Housing
Black
Not electrically connected to GND
2
3
4
5
6
7
8
9
1
10
11
12
GND: galvanically isolated from IN1, IN2, IN3, RS422,
laser on/off
laser on/off: input galvanically isolated from GND,
IN1, IN2, IN3, RS422
IN1, IN2, IN3, RS422: inputs galvanically isolated
from GND and laser on/off
12-pin. screw connector, view on solder side (cable)
RS422, Synchronization
The RS422 connection (Pin 11 and 12 of the multifunction port) can be used in either of
the following configurations:
- RS422 (half-duplex): Load user modes and sensor control, sensor control and
transmission of measurement results (Modbus RTU or ASCII format)
- Synchronization/triggering: Synchronization or triggering using switching signals
