9.
First Profile
Now start the scanCONTROL Configuration Tools software. Click on
Display
Profiles
in the main window.
If the software shows the error message
No scanCONTROL found
in the status
line, please check the Ethernet connection between scanCONTROL and PC.
On the left side you can adjust the settings for your measurement task, the right side
shows the profile data and information about the measurement.
10.
How to Access Profile Data
Profile data of scanCONTROL can be accessed via:
- GigEVision and GenICam for digital cameras via Ethernet interface
- SDK for fast application integration (C, C++, C# and others)
For details how to access profile data refer to the enclosed online manual.
11.
Transmitting Measurement Results
scanCONTROL 2510 offers the following options for transmitting measurement
results:
- Ethernet interface
Modbus TCP protocol
UDP protocol
Analog output of measurement values (via optional Output Unit)
Digital output of switching signals (via optional Output Unit)
Fieldbus connection Profinet, Ethernet/IP, EtherCat (via optional Gateway)
- RS422 interface
Modbus RTU protocol
Measurement value transmission in ASCII format
