Ethernet Connection, Standard Connection to PC
RJ45 connector
8-pin. screw connector (sensor side)
Pin no.
Color stranded hook-up
wire SCR3000A-x
Pin no.
10BaseT,
100BaseTX
1000BaseT
1
white (orange)
5
Tx+
D1+
2
orange
6
Tx-
D1-
3
white (green)
8
Rx+
D2+
4
blue
1
D3+
5
white (blue)
2
D3-
6
green
7
Rx-
D2-
7
white (brown)
3
D4+
8
brown
4
D4-
1
View on pin
side male cable
connector
2
3
4
5
6
7
8
1
View on solder pin side
(cable) screw connector
(A-coded)
- The sensor supports an automatically, sensor-adapted IP address in the
link-local-net (169.254.x.x). No collision detection is implemented.
This is also the default setting.
- The sensor supports DHCP. This setting is activated by default and has priority over
the retrieval in the link-local-net.
- The sensor scanCONTROL 25xx supports Power over Ethernet.
If the sensor is connected to a network adapter/switch that
is capable of POE and if you also use the power supply of
the multifunction port, these two power supplies have to be
galvanically isolated.
> Damage of the sensor and/or the Ethernet card!
- A fixed IP address can be assigned.
Use the program
sensorFINDER
to make the above-described sensor
settings. The program is available online on www.micro-epsilon.com/download/
software/SensorFinder.zip.
