1.
Warnings
Avoid unnecessary laser radiation to be exposed to the human body.
Connect the power supply and the display-/output device according to the safety
regulations for electrical equipment. The power supply must not exceed the specified
limits.
> Risk of injury, damage to or destruction of the sensor
Avoid shocks and impacts to the sensor. Avoid exposure of sensor to aggressive
materials (detergents, cooling emulsions).
> Damage to or destruction of the sensor
Avoid constant exposure of the sensor to dust or splashes of water by appropriate
methods such as blowing or using a protective housing.
> Damage to or destruction of the sensor
Read the detailed instruction manual before operating the sensor. You will find this
manual online at www.micro-epsilon.com.
2.
Notes on CE Identification
The following applies to the scanCONTROL 25xx:
- EU Directive 2014/30/EU
- EU Directive 2011/65/EU, “RoHS“ category 9
The sensor is designed for use in industry and satisfies the requirements. The sensor
fulfills the specifications of the EMC requirements, if the instructions in the manual are
followed.
3.
Proper Environment
- Protection class:
IP 65
- Operating temperature: 0 to +45 °C (+32 to +113 °F), by free circulation of air
- Storage temperature:
-20 to +70 °C ( -4 to +158 °F)
- Humidity:
5 - 95 % (non condensing)
4.
Scope of Delivery of scanCONTROL
25xx
- 1 Sensor scanCONTROL 25xx with integrated controller
- 1 Multifunction cable PCR3000-5, length 5 m; for power supply, trigger and RS422;
M12x1 screw connector and free cable ends
- Calibration final inspection / assembly instructions / 2 protective caps
Assembly Instructions
scan
CONTROL
2500 / 2510
